Bare Conductive Touch Board - 3DMakerWorld, Inc.
Bare Conductive Touch Board - 3DMakerWorld, Inc.
Bare Conductive Touch Board - 3DMakerWorld, Inc.
Bare Conductive Touch Board - 3DMakerWorld, Inc.

Bare Conductive Touch Board

Regular price $63.08
/
Shipping calculated at checkout.

Key Features:

  • No programming required
  • Touch and Distance sensing
  • Arduino compatible (recognised as an Arduino Leonardo in IDE) and easy to use
  • Works great with Electric Paint - turn anything into an interface!
  • Play MP3s or MIDI notes

The Touch Board is a microcontroller board with 12 capacitive touch and proximity electrodes, so you can use it to turn any material or surface into a sensor. Extend each of the Touch Board’s electrodes using Electric Paint or other conductive materials to create sensors on a range of objects or substrates. The base of the Touch Board is completely level, so you can easily attach it onto any flat surface.

The Touch Board has an MP3 decoder and MIDI synthesizer, so you can use it as a USB mouse or keyboard, or as a USB serial port or USB MIDI device. It has a 3.5mm audio jack and micoSD cardholder and comes with a 128MB microSD card.

The Touch Board is based on the Arduino Leonardo and uses the ATmega32U4, running at 16MHz and 5V. You can reprogram it using the Arduino IDE and a micro USB cable. The Touch Board also has a JST connector for an external LiPo battery, a power switch and a reset button.

Item Specifics
1 - Touch Board
1 - microSD card
Micro USB cable not included
Size: 1.2" x 5.3" x 4.2"
Weight: 2.2oz

Prop. 65 Warning for California Residents
⚠︎ Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.p65warnings.ca.gov


Recently viewed