Key Features:
- Extruder retrofit kit for dual-extruder direct-drive machines
- Right side only
- Print fast with flexible materials, higher resolution, and fewer failures
- Kit requires extruder disassembly to install upgrade
3D printer extruder retrofit kit for dual-extruder direct-drive machines, such as the Flashforge Creator Pro, QiDi Tech, Powerspec Ultra, and CTC Dual Extruder. The Flexion extruder will allow full-speed printing of flexible filaments and improved accuracy printing with PLA and ABS. The precision machined components allow your printer to push on filament harder, achieve high pressure in the nozzle, and control of feed rates very closely. The self-cleaning drive will keep your long prints from failing due to a clogged drive. Works well with flexible PLA, TPU, TPE ultra-flexible filament down to 50 Shore A, and all the standard rigid filaments like ABS and PLA.
Item Specifics
Weight : 0.1 lbs
Size: 3.5 x 4.5 x 1.25 in
Works with: Flashforge Creator, Monoprice Dual, Dremel, Wanhao 4S, Powerspec Ultra, CTC Dual Extruder, and many others
QiDi and CTC stock extruders are NOT compatible
QiDi temperature sensor location is moved and will read 10-15° low, so turn your print temperatures down.
Detailed instructions on disassembly and installation can be found on the Diabase Engineering site.
Includes
Mounting block
2 - Tensioning arm with idler and cleaning brush (one right & one left)
2 - Adjustment cam
2 - Drive gear
2 - Feed barrel
2 - Heater block
2 - Insulation for heater block
6 nozzles – 2 each 0.3, 0.4, 0.5 mm orifice
2 - Adapter shim to allow 6mm and 0.25″ heater cartridges
4 - PTFE feed tubes
2 - spare cleaning brushes
All mounting hardware
6mm and 7mm wrench for installing nozzles
Stepper motor or motor mounting screws not included