3DMakerWorld taulman3D Alloy 910 High Strength Filament - 3mm, White
Alloy 910 was developed to provide a super material with very high tensile, yet sufficient elongation to maintain a high degree of durability. Alloy 910, when 3D printed comes in at 8,100 psi tensile and close to 12,000 psi when injection molded.
Alloy 910 is the combined effort of chemical companies, extrusion manufactures and taulman3D to specifically develop a single material to meet as many high performance 3D Printing needs as possible. With a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.
Alloy 910 is the only Nylon based polymer that makes support removal easier than most using ABS.
Specifications when 3D Printed:
Tensile strength: 8,100 psi
Ultimate elongation: 32%
Tg glass transition temp: 82C
Typical Print Settings:
Print temp: 250C - 255C
Nozzle: any size
Print speed: ABS speeds
Retraction: 1mm/.1mm nozzle (e.g., for a .5mm nozzle = 5mm)