Key Features:
- Replaces the outdated LPT port.
- Controls up to 6-axis simultaneously.
- Works with Mach3 and Mach4 softwares via plugin.
- Fast communication with data buffer for robust and stabile operation; Up to 100kHz operation.
- USB connection to the control PC. (USB Cable included)
The UC100 motion controller overcomes the problems Mach3 software experiences with outdated technology and lagging G-code by removing all time critical tasks from the control computer and Windows and executing all these tasks on inside it's own high speed DSP control chip outside the PC. The UC100 controller connects to the PC via the USB port and this kind of port is more modern as an LPT port and exists on all today's computers.
The UC100 has a look as if it was a “simple USB to LPT port converter module”, but it is much more than this. The UC100 is the result of a 2 years hard development and testing cycle and it implements linear and arc interpolation routines with trajectory planner, communication routines, limits and homing functions handling and it has nearly all the functions (with some limitations) as what Mach3 supports with the LPT port driver.
Item Specifics
1 - UC100
1 - USB-A to Mini-B USB Cable
Same pinout as a standard LPT port.
Automatic firmware checking and firmware update.
Motion control on up to 6-axis (X, Y, Z, A, B, C)
Communication buffer: ~1 sec
Sink/source capability: 20mA max. per output
Compatible with UCCNC, Mach3, and Mach4 softwares