Key Features
- Larger drive wheels, for increased filament grip
- Filament pre-tension lever, for repeated results
- Drive wheels’ maintenance windows, for easy cleaning
- Compact, light & centered filament path, for increased performance and compatibility
- Multiple mounting hole patterns, for easy and flexible setup
The LGX Lite eXtruder is the second Bondtech extruder to present a pre-tension mechanism that includes an easy to use lever for users to release the tension or define it as one of 2 different settings. This extruder only supports 1.75 mm size filament.
The LGX® Lite features 4 mounting patterns: 4 holes at the bottom; 2 holes at the right hand side; 1 hole at the top plus the filament entry that may be used as anchor; and 2 holes across, to hold the stepper motor.
The housing parts are professionally printed with polyamide 12 for maximum strength, precision and higher temperature resistance.
Item Specifics
1x LGX® Lite feeder
1x LDO Nema14 Round 20mm pancake stepper motor; 1m long lead cable with JST-XH 4-pin connector
1x 2mm Hex Key (recommended tool)
1x Powered By Bondtech sticker.
1x Push-fit collar
1x 30mm PTFE tube to use in the PTFE Tube Adapter.
8x M3 square nuts for reinforcing mounting holes.
e-steps value : 562 using 16 microsteps; 1124 using 32 microsteps.
Drive wheels : hardened steel
Materials compatibility : abrasive; rigid; semi-flexible; flexible; and soft.
Mounting holes : M3
Mounting patterns : bottom (4 points); right (2 points), front to motor (2 points), top (1 point)
Hole at the top of the LGX® Lite : 5 mm depth
Holes on the side of the LGX® Lite : 5 mm depth
Holes on the bottom of the LGX® Lite : 5 mm depth
Max tightening torque on the extruder screws is 0.3 Nm
Motor gear : 10 teeth
Motor length: 20 mm
Motor Diameter: 36mm
Motor Max Current : 1.0 A / phase
Motor Step Angle : 1.8 degree
Motor Max Torque at : 1800 PPS
Motor Potential Flow Rate @ Max Torque : 120mm^3/s
Motor Class: H, rated peak temp 180?
Motor Max operating Temperature / Current : 120? / 750 mA
Motor Manufacturer SKU : LDO-36STH20-1004AHG(XH)
Note: Compatible with Nema14 round stepper motors
**Use the LGX Lite only with a Ø36mm round stepper motor featuring a 10 teeth motor gear.