- Heated Bed for Um2Go
- Brings the bed to 110C and the print head to 290C, if you need
- No more trouble getting stuff to stick
If you have a Um2Go, you will wonder how you “did it” before, after this upgrade. This is a heated bed upgrade for UM2, without the need to change the powersupply! The kit contains a custom silicon heater pad with a sticky side providede by 3M. Just place it under the aluminum bed. The kit also contains a custom heater for the hot end. Without a new heater the heated bed will not work.
Weight: 0.1 kg
Size: 10 × 10 × 1 cm
Max Temp: 290degC
Warning: you must download and install new firmware (using Cura), for this upgrade to work.