Key Features:
- Comes fully assembled and ready to plug into your Pi
- Designed to fit nicely onto the Pi 1 Model A or B but also works OK with the Pi 4, Pi Zero, Pi 3, Pi 2 or Pi 1 Model A+ or B+ (any Pi with a 2x20 connector)
- 2.8" display with 320x240 16-bit color pixels
- Resistive Touch Overlay
Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!
It's designed to fit nicely onto the Pi 1 Model A or B but also works OK with the Pi 4, Pi Zero, Pi 3, Pi 2 or Pi 1 Model A+ or B+ (any Pi with a 2x20 connector) as long as you don't mind the PCB overhangs the USB ports by 5mm. If you have a modern Pi with a 2x20 connector, you may want to grab a PiTFT 2.8" Plus which does not overhang
Uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since there was a tiny bit of extra space, there are 4 spots for optional slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.