Adafruit Ultimate GPS with USB - 66 channel w/10 Hz updates - 3DMakerWorld, Inc.
Adafruit Ultimate GPS with USB - 66 channel w/10 Hz updates - 3DMakerWorld, Inc.
Adafruit Ultimate GPS with USB - 66 channel w/10 Hz updates - 3DMakerWorld, Inc.
Adafruit Ultimate GPS with USB - 66 channel w/10 Hz updates - 3DMakerWorld, Inc.
Adafruit Ultimate GPS with USB - 66 channel w/10 Hz updates - 3DMakerWorld, Inc.

Adafruit Ultimate GPS with USB - 66 channel w/10 Hz updates

Regular price $39.95
/
Shipping calculated at checkout.

Key Features

  • Built around the MTK3333 chipset, a no-nonsense, high-quality GNSS module that can track up to 33 satellites on 99 channels
  • Built-in antenna & excellent high-sensitivity receiver (-165 dBm tracking)
  • Can do up to 10 location updates a second for high speed, high sensitivity logging, or tracking
  • Power usage is incredibly low, only ~29 mA during navigation.
  • Comes with a modern USB C connector on the board (instead of micro USB)

The Ultimate GPS module you know and love has a glow-up to let it be easily used with any computer, not just microcontrollers! With the built-in USB-to-Serial converter, you can now plug-n-play the Ultimate GPS into your computer, laptop, embedded Linux computer, and more. Power and transport data over any USB type C cable, with handy onboard indicator LEDs that let you know fix status and whether data is being received & transmitted.

We added all the extra goodies you could ever want: 4-pin USB breakout for direct-soldering or connection to a USB host, two yellow receive/transmit LEDs let you know when data is being transmitted to or from the GPS module serial interface, a footprint for optional CR1220 coin cell to keep the RTC running and allow warm starts and a tiny bright red LED. The LED blinks at about 1Hz while it's searching for satellites and blinks once every 15 seconds when a fix is found to conserve power. If you want to have an LED on all the time, we also provide the FIX signal out on a pin so you can put an external LED on.

Two features that really stand out about the MTK3333-based module are the external antenna functionality and the built-in data-logging capability. The module has a standard ceramic patch antenna that gives it -165 dBm sensitivity, but when you want to have a bigger antenna, you can snap on any 3V active GPS antenna via the uFL connector. The module will automatically detect the active antenna and switch over! Most GPS antennas use SMA connectors so you may want to pick up one of our uFL to SMA adapters.

Item Specific
PS + GLONASS supported
Satellites: 33 tracking, 99 searching
Patch Antenna Size: 15mm x 15mm x 4mm
Update rate: 1 to 10 Hz
Position Accuracy: < 3 meters (all GPS technology has about 3m accuracy)
Velocity Accuracy: 0.1 meters/s
Warm/cold start: 34 seconds
Acquisition sensitivity: -145 dBm
Tracking sensitivity: -165 dBm
Maximum Velocity: 515m/s
Vin range: 3.0-5.5VDC
MTK3333 Operating current: 34mA acquision, 29 mA tracking
Output: NMEA 0183, 9600 baud default, 3V logic level out, 5V-safe input
DGPS/WAAS/EGNOS supported
AGPS support (Offline mode : EPO valid up to 14 days )
Up to 210 PRN channels
Jammer detection and reduction
Multi-path detection and compensation
Weight (not including coin cell or holder): 9.9g
Dimensions (not including coin cell or holder): 40.8mm x 25.3mm x 8.1mm

Prop. 65 Warning for California Residents
⚠︎ Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.p65warnings.ca.gov


Recently viewed