E3D Volcano Upgrade Kit - Starter Pack - 1.75mm - 3DMakerWorld, Inc.
E3D Volcano Upgrade Kit - Starter Pack - 1.75mm - 3DMakerWorld, Inc.
E3D Volcano Upgrade Kit - Starter Pack - 1.75mm - 3DMakerWorld, Inc.
E3D Volcano Upgrade Kit - Starter Pack - 1.75mm - 3DMakerWorld, Inc.
E3D Volcano Upgrade Kit - Starter Pack - 1.75mm - 3DMakerWorld, Inc.

E3D Volcano Upgrade Kit - Starter Pack - 1.75mm

Regular price $57.63
/
Shipping calculated at checkout.

Key Features:

  • 3x the volumetric flow rate of the V6 HotEnd
  • E3D Eco system compatible
  • Print bigger and stronger parts, faster
  • All metal heatbreak

The Volcano HotEnd is the solution to slow printing. Boasting 3x the volumetric flow rate of the standard V6, Volcano enables you to print bigger and stronger parts, faster. If you've got a printer with a large build volume then the Volcano HotEnd is a must-have. Thanks to its larger melt zone, the Volcano upgrade enables users to print thicker and wider tracks which results in dramatically reduced print times.

In addition to reduced print time, the thick tracks printed by Volcano have greater interlayer adhesion and bond to one another with improved strength. Parts printed are extremely strong, less brittle and feel much more sturdy than standard prints.

Item Specifics
1 - V6 Universal Fixing Kit
4 - Plastfast30 3.0 X 16 Screws (for securing fan)
1 - Thermistor Cartridge
1 - 30W Heater Cartridge
1 - Extension Wire (for thermistor)
1 - Ziptie
1 - Volcano Heater Block
1 - 0.80 mm Brass Volcano Nozzle
Compatible with all E3D HotEnds except Cyclops
Do not use with any nozzle other than Volcano Nozzles

Prop. 65 Warning for California Residents
⚠︎ Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.p65warnings.ca.gov


Recently viewed