Key Features
- The Blingy RGB ESP32-S2 Development Board in the Feather format!
- 32-bit 240 MHz single-core processor
- 4 MB SPI Flash
- 2 MB extra PSRAM
- 2.4 GHz Wi-Fi - 802.11b/g/n
- 3D antenna
- 700 mA 3.3 V LDO regulator
- Optimised power path for low-power battery usage
- LiPo battery management
- Power (red), Charge (orange) & IO13 (blue) LEDs
- 5x5 RGB LED matrix + User controller power
- 22x GPIO
- VBAT voltage sense on IO2
- VBUS detection om IO34
- USB-C
- RGB LED (PWR 39, DATA IO40)
- QWIIC/STEMMA connector
Getting compelling information out of a single RGB LED can be a real challenge, so with a 5x5 matrix, you can scroll text, show icons or even display cool animating patterns!
The RGB Matrix is powered from its own 3.3V LDO, that defaults to the off state, so there is no current draw if you put the FeatherS2 Neo into deep sleep. Turning the power on is as simple as setting IO4 HIGH.
FeatherS2 Neo ships with CircuitPython 7.0.rc0 pre-installed, including version 0.5.1 the UF2 bootloader, so you can easily update your FeatherS2 Neowith the latest CircuitPython firmware, whenever you desire.