Key Features:
- Popular in vintage stereo equipment from the 70s
- Replacement for Marantz, Sansui, Kenwood, Yamaha, Sony, and other classic receivers
- Draws only 23 mA vs. 250 mA, which saves energy
- Amp runs cooler compared to incandescent bulbs
- Five per package, which most amps require
Rejuvenate your vintage stereo receivers without worrying that you will be replacing the lamps again. LED fuse lamps provide a warm white glow for tuner dials and level meters so your vintage equipment will come back to life. These warm white LED's are as close in color and hue to the original incandescent bulbs as you can get! These LED bulbs use 1/10th of the original current.
Fuse lamps are easy to change, because there is no soldering needed. They slide in and out of a normal 1-1/4 glass fuse holder. Replace all the old fuse lamps and you should never have to do this again. You will fall in love with your stereo receiver all over again once you install these new fuse lights. Your amp will actually run cooler and use less electrical current while you enjoy the soft backlighting it supplies.
These LED fuse lamps have multiple application possibilities, because they can work with 8 volt AC or DC. For quick lighting use a fuse holder, 9 volt battery clip, female quick disconnects and a 9 volt battery. For 12 volt use, add a 100 ohm 1/2 watt resistor and now you have lighting for inside your vehicle. With a 9 volt AC adapter you can add lighting to large scale models or doll houses. Light up panels on small projects with at least 5 VDC. How will you use these long lasting LED fuse lights?
Item Specifics
Color: Warm White
Circuit: SPDT
Contact Rating at Voltage: 10A 125 VAC, 20A 12 VDC
Shaft diameter: 20 mm (25/32)
Contacts: 3
Approvals: TUV, CE
California Prop 65 Warning
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov