Key Features:
- For Teensy version 3.2, 3.5, 3.6, 4.0, 4.1
- 74HCT245 buffer chip and 100 ohm impedance matching resistors
- Designed to fit inside a CableGaurd 500 Coax Demarcation Enclosure
- Network jack allows your LED array to be easily disconnected from the electronics
This adaptor board connects Teensy 3.2 - Teensy 4.1 to thousands of LEDs using the OctoWS2811 Library. It features a 74HCT245 buffer chip and 100 ohm impedance matching resistors. CAT6 Ethernet cable is used from this board to the LED strips. CAT6 cable is designed for very high bandwidth, minimal cross-talk between twisted pairs, and 100 ohm impedance, for a very high quality signal. The RJ-45 network jacks allow your LED array to be easily disconnected from the electronics.
This adaptor can also be used with the larger Teensy 3.5, 3.6, 4.1 boards using double insulator pins andsockets. Together, these are tall enough to allow the longer board with SD socket to overhang the RJ-45 connectors. Teensy 3.x is added on top of the adaptor using stacking header pins, or a header and socket pair if you wish to be able to remove the Teensy 3.x board.
Item Specifics
1 - Adaptor board
4 - self tapping screws
Recommended Accessories (not included):
Using Teensy 3.2 or 4.0: Sockets 14x1 (2), Pins 14x1 (2)
Using Teensy 3.5 or 3.6 or 4.1: Sockets 14x1 (2), Pins 14x1-D (2)