Key Features:
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- 0.8mm Thin PCB
- USB connection off board
- On board Power and Status LEDs
What's blue, thin, and comes with everything you need to get started? The Pro Mini 5V Starter Kit! The Pro Mini is SparkFun's minimal design approach to Arduino running at 5V with a 16MHz bootloader. The Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need.
The Arduino Pro Mini in this kit works well with the FTDI Basic Breakout which is why we included one in the starter kit. The voltage regulator on board accepts voltage up to 12VDC. If you're supplying unregulated power to the board be sure to connect to the "RAW" pin and not VCC. The latest and greatest version of this board also breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C resistors.
Item Specifics
1 - Arduino Pro Mini 328 - 5V/16MHz
1 - FTDI Basic Breakout - 5V
1 - USB Mini-B Cable - 6"
2 - Break Away Headers - Straight (40 pins)
1 - Break Away Headers - Right Angle (6 pins)
2 - Female Headers (2 pins)
1 - Breadboard - Mini Modular (White)
30 - Jumper Wires Premium 4" M/M
1 - LED - Basic Red 3mm
1 - LED - Basic Green 3mm
2 - Resistor 330 Ohm 1/6th Watt PTH
Supports auto-reset
5V regulator
Max 150mA output
Over current protected
DC input 5V up to 12V
Analog Pins: 8
Digital I/Os: 14
Size: 0.7x1.3" (18x33mm)
Weight: less than 2g