Key Features:
- Super-small SHIM-format board
- 0.8mm thick PCB
- Can be used with HATs and pHATs
- Corner-mounted push button for on/off
- Micro-B connector for power supply
Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Pimoroni's SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare board, not including mounted components) and designed to be soldered straight onto the GPIO pins of your Pi, if you wish, so that you can use them with HATs and pHATs on top.
Just plug your micro-USB power supply into the micro-B connector on OnOff SHIM, and then press the button once to switch on power and boot up your Pi. After installing Pimoroni's software, you can press and hold the button for one second to initiate a clean shutdown and completely cut the power to your Pi.
Item Specifics
Red status LED
Optional breakout pins to connect an external momentary button
2x6 female header included
Supports up to 2.5A power supply
Software daemon to shutdown cleanly
Compatible with all 40-pin header Raspberry Pi models
Soldering required
Note: Recommended power spec for the Pi 4 is 3A