Adafruit INA169 Analog DC Current Sensor Breakout - 60V 5A Max - 3DMakerWorld, Inc.
Adafruit INA169 Analog DC Current Sensor Breakout - 60V 5A Max - 3DMakerWorld, Inc.

Adafruit INA169 Analog DC Current Sensor Breakout - 60V 5A Max

Regular price $18.42
/
Shipping calculated at checkout.

Key Features:

  • Measure both the DC current draw and have a handy analog output that is with respect to ground
  • Ideal breakout for feedback-loop control
  • Rated for 2W continuous so you can measure up to +5A continuous
  • 0.1 ohm, 1% 2W current sense resistor

This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy INA169 chip on this breakout to both measure both the DC current draw and have a handy analog output that is with respect to ground. The analog output makes this an ideal breakout for feedback-loop control.

A precision amplifier measures the voltage across the 0.1 ohm, 1% sense resistor. The resistor is rated for 2W continuous so you can measure up to +5A continuous. The output is a current that is drawn through the on-board 10K resistor so that the output voltage is 1V per Amp. So for 2A draw, the output will be 2V. You can change out the load resistor to be larger or smaller by cutting the traces next to it and soldering a thru hole resistor over. If you solder in a 20K resistor you'll get 2V per Amp, with a 5K resistor, 0.5V per Amp.

Item Specifics
Target Voltage: Up to +60V
Terminal block included with your product may be blue or black.

Prop. 65 Warning for California Residents
⚠︎ Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.p65warnings.ca.gov


Recently viewed