Adafruit 10K Precision Epoxy Thermistor
- Measure temperature in weather or liquids
- PVC coating of the wires is good up to 105 °C
- Additional 1% 10K resistor which you can use as calibration or for a resistor divider
Need to measure something damp? This epoxy-coated precision 1% 10K thermistor is an inexpensive way to measure temperature in weather or liquids. The resistance in 25 °C is 10K (+- 1%). The resistance goes down as it gets warmer and goes up as it gets cooler. For specific temperature-to-resistance, check the lookup table .
These are often used for air conditioners, water lines, and other places where they can get damp. The PVC coating of the wires is good up to 105 °C so this isn't good for very hot stuff.
We even toss in an additional 1% 10K resistor which you can use as calibration or for a resistor divider.
Resistance at 25 degrees C: 10K +- 1%
B25/50 = 3950+- 1%
Thermal time constant <= 15 seconds
Thermistor temperature range -55 °C to 125 °C
28 AWG PVC Wire
Diameter: 0.13”/ 3.3mm
Length: At least 457mm / 18" long