Key Features:
- Control each LED individually by setting the color of each LED's red, green and blue component
- 60 RGB LEDs per meter
- Easy to cut, black, flexible PCB Material marked with cut-lines
- Connect more LEDs to make strip longer
You thought it couldn't get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! These NeoPixel strips have 60 digitally-addressable pixel LEDs per meter and are only 12.5 mm wide, 10 mm without the casing. The strip is made of black flexible PCB material, and comes with a weatherproof sheathing with 0.65" cut lines to shorten the strip. You can also connect strips together to make them longer, just watch how much current you need! A 5V/2A supply should be able to drive 1 meter and a 5V/10A supply can drive up to 10 meters. You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip. The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen to your desire. Only 1 digital output pin are required to send data down. The 8-bit precision PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.
Item Specifics
Casing Color: Black
Width: 12.5mm (0.5") wide
Thickness: 4mm (0.16") thick w/ casing, 1.85mm (0.07") thick w/o casing
Segment Length: 16.7mm (0.65") long
Strip Length: 1 meter (60 LEDs)
Removable IP65 weatherproof casing
Maximum 5V @ 60mA draw per 0.65" strip segment (all LEDs on full brightness)
5VDC power requirement (do not exceed 6VDC) - no polarity protection
1 integrated RGB LEDs/segment, individually controllable
LED wavelengths: 630nm/530nm/475nm
Connector: 2-pin JST SM
May use either WS2812B or SK6812-based LEDs. They are the same brightness, color and protocol