Adafruit PIR Motion Sensor - 3DMakerWorld, Inc.
Adafruit PIR Motion Sensor - 3DMakerWorld, Inc.
Adafruit PIR Motion Sensor - 3DMakerWorld, Inc.
Adafruit PIR Motion Sensor - 3DMakerWorld, Inc.

Adafruit PIR Motion Sensor

Regular price $18.42
/
Shipping calculated at checkout.

Key Features:

  • Detect motion up to 7 meters away
  • Perfect for Raspberry Pi or Arduino Projects
  • Easy to use
  • Requires soldering of header pins

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensitivity and we include a 1 foot (30 cm) cable with a socket so you can easily reposition the sensor or mount it using the two drills on either side. Runs on 5V-16V power (if you need to run it off of 3V you can do that by bypassing the regulator, but that means doing a bit of soldering). Digital signal output is 3.3V high/low. Sensing range is about 7 meters (120 degree cone) There are many tutorial available on Adafruit's website for these sensors!

Item Specifics
Power: 5v-16v
Digital Signal output: 3.3v high/low.
Sensing range: 7 meters
Adjustable Delay timing: 2-4 seconds

Prop. 65 Warning for California Residents
⚠︎ Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.p65warnings.ca.gov


Recently viewed