Adafruit QT Py - SAMD21 Dev Board with STEMMA QT - 3DMakerWorld, Inc.
Adafruit QT Py - SAMD21 Dev Board with STEMMA QT - 3DMakerWorld, Inc.
Adafruit QT Py - SAMD21 Dev Board with STEMMA QT - 3DMakerWorld, Inc.
Adafruit QT Py - SAMD21 Dev Board with STEMMA QT - 3DMakerWorld, Inc.
Adafruit QT Py - SAMD21 Dev Board with STEMMA QT - 3DMakerWorld, Inc.
Adafruit QT Py - SAMD21 Dev Board with STEMMA QT - 3DMakerWorld, Inc.
Adafruit QT Py - SAMD21 Dev Board with STEMMA QT - 3DMakerWorld, Inc.

Adafruit QT Py - SAMD21 Dev Board with STEMMA QT

Regular price $16.92
/
Shipping calculated at checkout.

Key Features:

  • Runs Arduino like a dream, and can be used for basic CircuitPython projects.
  • Use any SparkFun Qwiic boards! Seeed Grove I2C boards will also work with this adapter cable.(not included)
  • Same size, form-factor, and pin-out as Seeed Xiao
  • ATSAMD21E18 32-bit Cortex M0+ - 48 MHz 32 bit processor with 256KB Flash and 32 KB RAM
  • USB Type C connector

What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with our favorite lil chip, the SAMD21 (as made famous in our GEMMA M0 and Trinket M0 boards).

This time it comes with our favorite connector - the STEMMA QT, a chainable I2C port that can be used with any of our STEMMA QT sensors and accessories.

OLEDs! Inertial Measurment Units! Sensors a-plenty. All plug-and-play thanks to the innovative chainable design: SparkFun Qwiic-compatible STEMMA QT connectors for the I2C bus so you don't even need to solder! Just plug in a compatible cable and attach it to your MCU of choice, and you’re ready to load up some software and measure some light.

Item Specifics
Built in RGB NeoPixel LED
True analog output on one I/O pin - can be used to play 10-bit quality audio clips in Arduino (CircuitPython does not have storage for audio clips)
9 x 12-bit analog inputs (SDA/SCL do not have analog inputs)
1 x Optional AREF on A1
9 x PWM outputs (A0 is analog out, A1 is not PWM capable)
Hardware I2C port with STEMMA QT plug-n-play connector
Hardware UART
Hardware SPI
Hardware I2S
6 x Capacitive Touch with no additional components required?
3.3V regulator with 600mA peak output
Optional SOIC-8 SPI Flash chip on bottom
Reset switch for starting your project code over or entering bootloader mode

Prop. 65 Warning for California Residents
⚠︎ Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.p65warnings.ca.gov


Recently viewed