Key Features:
- Single Flexion extruder with an E3D mount
- Precision extrusion of virtually every available filament thanks to excellent E3D hotends
- Comes with 4 spare nozzles
3D printer extruder retrofit kit for E3D v6 hotend (1.75mm). This allows the use of the Flexion Extruder with the excellent E3D hotends – enabling precision extrusion of virtually every available filament from Nylon to ultra-flexible Shore 50A. This uses the same mounting hole pattern as the E3D extruder, and also has a couple mounting holes in the front. It includes a PTFE tube cut to length for the E3D v6 hotends. So you’ll have all the same advantages of precision, supported, reliable filament driving with the flexibility to print at much higher temperatures.
Item Specifics
Weight : 0.1 lbs
Size: 3.5" × 4.5" × 1.25"
Works with: RepRap and Lulzbot printers with E3D v6 hotend (1.75mm)
Detailed instructions on disassembly and installation can be found on the Diabase Engineering site.
Includes
Flexion extruder
E3D Mounting block and mounting hardware
Tensioning arm with idler and cleaning brush (one right & one left)
Adjustment cam
Drive gear
4 Nozzles - 0.2, 0.3, 0.4, and 0.5 mm orifice
2 - PTFE feed tubes
Spare cleaning brushes
Hotend, stepper motor or motor mounting screws not included