Lay Filaments LAY-BRICK - 3.0mm, 0.25kg - 3DMakerWorld, Inc.
Lay Filaments LAY-BRICK - 3.0mm, 0.25kg - 3DMakerWorld, Inc.
Lay Filaments LAY-BRICK - 3.0mm, 0.25kg - 3DMakerWorld, Inc.
Lay Filaments LAY-BRICK - 3.0mm, 0.25kg - 3DMakerWorld, Inc.

Lay Filaments LAY-BRICK - 3.0mm, 0.25kg

$38.46
/
Shipping calculated at checkout.

Key Features:

  • Allows you to create innovative decorative pieces
  • Made of sandstone
  • Creates a stone or ceramic like surface

Lay-Brick is a unique filament made with sandstone and a binding polymer that creates a surface finish similar to a stone or ceramic, the surfaces are more or less rough. Lay-Brick, like the Laywoo-D3, is recommended for 3D printing of decorative pieces. 

To prevent future nozzle blockage, it is highly recommended to remove the remaining filament after printing.

Item Specifics
Diameter tolerance: ± 0.1 mm
Printing temperature: 165 - 210 degC
Print bed temperature: 20-40 degC
Recommended Nozzle diameter: > 0.40 mm
Series: Lay-Brick
Material: Sandstone with bonding polymer
Weight: 0.25kg
Filament Size: 2.85mm

Prop. 65 Warning for California Residents
⚠︎ Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.p65warnings.ca.gov

Recently viewed