3D PotterBot Micro 10 Ceramic 3D Printer - 3DMakerWorld, Inc.
3D PotterBot Micro 10 Ceramic 3D Printer - 3DMakerWorld, Inc.
3D PotterBot Micro 10 Ceramic 3D Printer - 3DMakerWorld, Inc.
3D PotterBot Micro 10 Ceramic 3D Printer - 3DMakerWorld, Inc.

3D PotterBot Micro 10 Ceramic 3D Printer

Regular price $3,135.00
/
Shipping calculated at checkout.

Key Features:

  • This 10th generation brings a new wireless feature with a full web interface controlled over WiFi.
  • Print real clay with direct extrusion - no need to worry about thining down the clay with water or alcohol
  • New uniform nozzle design improves performance, across all of PotterBot printers, from the Micro to the Scara V4
  • 1,000 ml extruder and a build envelope of up to 1 foot!

The Micro is an entry level 3D ceramic printer. This is an ideal printer for the classroom environment or an individual artist that just wants to get started with the new technology. It features the 1,000 ml extruder and the build envelope of up to 1 foot. Even though this is 3D Potter's smallest 3D clay printer, it is capable of the highest print speeds. Its compact design can easily fit in almost any space.

3D Potter printers use high quality anodized aluminum rails. These rails are robust and have a smooth surface, allowing for easy movement of parts while being able to withstand classroom or industrial environments.

Included in Box
1 - 3D PotterBot Micro
1 - Stepper motors on X, Y, Z, extruder
2 - 1000ml extruder tubes
4 - Anodized aluminum nozzles (standard sizes: 3, 4, 5, and 6mm)
Parts Box: Alan key set, grease, tie wraps, extra screws
ACME driver tool to load/unload extruder
Power Supply

Item Specifics
Printing Envelope: X-10” (280mm), Y-10” (265mm), Z-12” (305mm)
3D Printer size(WxLxH): 21 x 30 x 28 in
Operation space needed(WxLxH): 22 x 30 x 50 in
Bat diameter (printer bed): 10.5"x10.5” (266mmx266mm)
Height to the top of the extruder fully extended: 50" (1270mm)
Weight with extruder: 38 lbs. (17kg)
Recommended print speed: 1.2” to 2.4”/s (30 to 60 mm/s)
Maximum print speed: 5.1in”/s (130mm/s)
Power Supply: Output - 24V 6 amps, Input - 100-240V, 50-60 Hertz.
Power consumption: 24V ~3 amps, ~72 Watt
Main controller board running Duet3D with Atmel SAM4E8E: 120MHz ARM Cortex-M4   

Full control through web interface, no apps or software installation. Non-WiFi versions are available, please contact us if you would like this type of connection (Ethernet connection).

Prop. 65 Warning for California Residents
⚠︎ Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.p65warnings.ca.gov


Recently viewed