Bondtech LGX Lite Extruder without Motor (EXT-LGX-LITE-T) - 3DMakerWorld, Inc.
Bondtech LGX Lite Extruder without Motor (EXT-LGX-LITE-T) - 3DMakerWorld, Inc.
Bondtech LGX Lite Extruder without Motor (EXT-LGX-LITE-T) - 3DMakerWorld, Inc.
Bondtech LGX Lite Extruder without Motor (EXT-LGX-LITE-T) - 3DMakerWorld, Inc.
Bondtech LGX Lite Extruder without Motor (EXT-LGX-LITE-T) - 3DMakerWorld, Inc.
Bondtech LGX Lite Extruder without Motor (EXT-LGX-LITE-T) - 3DMakerWorld, Inc.
Bondtech LGX Lite Extruder without Motor (EXT-LGX-LITE-T) - 3DMakerWorld, Inc.

Bondtech LGX Lite Extruder without Motor (EXT-LGX-LITE-T)

Regular price $72.18
/
Shipping calculated at checkout.

Key Features

  • Larger drive wheels, for increased filament grip
  • Filament pre-tension lever, for repeated results
  • Drive wheels’ maintenance windows, for easy cleaning
  • Compact, light & centered filament path, for increased performance and compatibility
  • Multiple mounting hole patterns, for easy and flexible setup

The LGX Lite eXtruder is the second Bondtech extruder to present a pre-tension mechanism that includes an easy to use lever for users to release the tension or define it as one of 2 different settings. This extruder only supports 1.75 mm size filament.

The LGX® Lite features 4 mounting patterns: 4 holes at the bottom; 2 holes at the right hand side; 1 hole at the top plus the filament entry that may be used as anchor; and 2 holes across, to hold the stepper motor.

The housing parts are professionally printed with polyamide 12 for maximum strength, precision and higher temperature resistance.

Item Specifics
1x LGX® Lite feeder
1x 2mm Hex Key (recommended tool)
1x Powered By Bondtech sticker.
1x Push-fit collar
1x 30mm PTFE tube to use in the PTFE Tube Adapter.
8x M3 square nuts for reinforcing mounting holes.
e-steps value : 562 using 16 microsteps; 1124 using 32 microsteps.
Drive wheels : hardened steel
Materials compatibility : abrasive; rigid; semi-flexible; flexible; and soft.
Mounting holes : M3
Mounting patterns : bottom (4 points); right (2 points), front to motor (2 points), top (1 point)
Hole at the top of the LGX® Lite : 5 mm depth
Holes on the side of the LGX® Lite : 5 mm depth
Holes on the bottom of the LGX® Lite : 5 mm depth
Max tightening torque on the extruder screws is 0.3 Nm
**Use the LGX Lite only with a Ø36mm round stepper motor featuring a 10 teeth motor gear.

Prop. 65 Warning for California Residents
⚠︎ Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.p65warnings.ca.gov


Recently viewed