Key Features:
- Preferred by professionals who like to print multiple vessels at a time, or many single prints back to back.
- This 10th generation brings a new wireless feature with a full web interface controlled over WiFi.
- Print real clay with direct extrusion - no need to worry about thining down the clay with water or alcohol
- New uniform nozzle design improves performance, across all of PotterBot printers, from the Micro to the Scara V4
The 10 PRO is the first printer in our lineup that uses hybrid motors on every axis. Utilizing the hybrid stepper motor with our clay extruder gives you faster extrusion speeds and higher volume output. This means you can use larger nozzles AND your print time will be reduced. The hybrid stepper motor on the extruder is capable of higher forces so a thicker paste material can be extruded. The motors have their own internal torque settings, so if there is a blockage, they will shut themselves off automatically.
3D Potter printers use high quality anodized aluminum rails. These rails are robust and have a smooth surface, allowing for easy movement of parts while being able to withstand classroom or industrial environments. All materials used to build our printers are food grade, so get creative.
Included in Box
1 - 3D PotterBot 10 PRO
1 - Closed Loop Stepper motors on X, Y, Z, extruder
2 - 2000ml extruder tubes
4 - Anodized aluminum nozzles (standard sizes: 3, 4, 5, and 6mm)
Parts Box: Alan key set, grease, tie wraps, extra screws
ACME driver tool to load/unload extruder
Power Supply & USB Cable
Item Specifics
Printing Envelope: X-16” (415mm), Y-16” (405mm), Z-20” (500mm)
3D Printer size(WxLxH): 26 x 34 x 36 in
Operation space needed(WxLxH): 32 x 40 x 78 in
Bat diameter (printer bed): 15" x 15” (381mm x 381mm)
Height to the top of the extruder fully extended: 78" (1270mm)
Weight with extruder: 46 lbs. (20kg)
Recommended print speed: 1.1”/s’ to 5.1’’/s (30 to 130 mm/s)
Maximum print speed: 7.9in”/s (200mm/s)
Power Supply: Output - 24V 10 amps, Input - 100-240V, 50-60 Hertz.
Power consumption: 24V ~4 amps, ~96 Watt
Main controller board running Duet3D with Atmel SAM4E8E: 120MHz ARM Cortex-M4
Full control through web interface, no apps or software installation.