Key Features:
- 30% more printing area than the standard size model, allowing for even more creative designs.
- This 10th generation brings a new wireless feature with a full web interface controlled over WiFi.
- Print real clay with direct extrusion - no need to worry about thining down the clay with water or alcohol
- New uniform nozzle design improves performance, across all of PotterBot printers, from the Micro to the Scara V4
The 3D PotterBot 10 XL is the largest cardinal rail axis printer by 3D Potter. It uses the strongest motors and has 30% more printing area than their standard size model, allowing for even more creative designs. The 10 XL ceramic 3D printer has the capability of printing vessels up to 28" (71cm) high with 18 pounds of clay being extruded at one time. It is constructed with extremely durable components. The 10 XL has the largest extruder out of all of our printers, letting you print the most amount of clay with the least amount of tube reloading.
3D Potter printers use high quality anodized aluminum rails. These rails are robust and have a smooth surface, allowing for easy movement of parts while being able to withstand classroom or industrial environments. All materials used to build our printers are food grade, so get creative.
Included in Box
1 - 3D PotterBot 10 XL
1 - Closed Loop Stepper motors on X, Y, Z, extruder
2 - 3600ml extruder tubes
4 - Anodized aluminum nozzles (standard sizes: 3, 4, 5, and 6mm)
Parts Box: Alan key set, grease, tie wraps, extra screws
ACME driver tool to load/unload extruder
Power Supply & USB Cable
Item Specifics
Printing Envelope: X-19.3” (415mm), Y-19.3” (405mm), Z-28” (500mm)
3D Printer size(WxLxH): 32 x 40 x 47 in
Operation space needed(WxLxH): 32 x 40 x 85 in
Bat diameter (printer bed): 15" x 15"(381mm)
Height to the top of the extruder fully extended: 89" (1270mm)
Weight with extruder: 60 lbs. (20kg)
Recommended print speed: 1.1”/s’ to 7.9’’/s (30 to 200 mm/s)
Maximum print speed: 7.9in”/s (200mm/s)
Power Supply: Output - 24V 10 amps, Input - 100-240V, 50-60 Hertz.
Power consumption: 24V ~ 6 amps, ~144 Watt
Main controller board running Duet3D with Atmel SAM4E8E: 120MHz ARM Cortex-M4
Full control through web interface, no apps or software installation.