Adafruit Premium Female/Female Jumper Wires - 20 x 6" - 3DMakerWorld, Inc.
Adafruit Premium Female/Female Jumper Wires - 20 x 6" - 3DMakerWorld, Inc.
Adafruit Premium Female/Female Jumper Wires - 20 x 6" - 3DMakerWorld, Inc.

Adafruit Premium Female/Female Jumper Wires - 20 x 6"

Regular price $9.80
/
Shipping calculated at checkout.

Key Features:

  • Handy for making wire harnesses or jumpering between headers on PCB's
  • Premium jumper wires 6" (150mm) long
  • 0.1" female header contacts on either end
  • Comes as a 20-pin ribbon cable

These female-female jumper wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow colors). They have 0.1" female header contacts on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 20-pin ribbon cable. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses.

For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since that side is a tiny bit wider than 0.1"

Item Specifics
Length: 150mm / 6"
Weight: 13.5g
Each wire is 28 AWG (7 strands @ 36 AWG)
Note: Jumper wires can come a bit longer in length

Prop. 65 Warning for California Residents
⚠︎ Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.p65warnings.ca.gov


Recently viewed